The first thing to know about VIRPIL is that it does not sell a joystick — it sells the parts of one. A VIRPIL flightstick is a base plus a grip, bought as two separate items, which is why so many newcomers land on a grip page and assume they are looking at a complete stick. Get the order right and the range becomes straightforward: choose the base, then the grip, then a throttle, then the mounts and modular extras.
That order matters because the base decides almost everything downstream. Bases with a wide mechanical throw suit an unextended desk or side stick; a base with a shorter throw and externally adjustable preload is the one that makes sense under a long center-mounted extension. Pick the base first and the rest of the build tends to fall into place.
This guide maps the current VIRPIL lineup — mechanical bases, force feedback, grips, throttles, control panels, collectives and mounts — and separates what is in production from what has quietly moved to legacy status. The throttle line has changed the most, and a lot of older advice still points buyers at a model that is no longer current.
FlightRigGuide is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
How a VIRPIL Setup Actually Fits Together
A VIRPIL flightstick is built from two purchases. The base is the mechanical core and the electronics — cams, springs, clutches, sensors. The grip is the handle, with its triggers, hats and buttons. Neither works without the other, and the base profiles the grip, so this is not a place to mix brands on a first build.
From that single unit the rest of the ecosystem stacks up:
- A HOTAS is one base, one grip and a throttle.
- A HOSAS is two bases and two matching grips, sold in dedicated left- and right-hand versions.
- A long center stick is the same stick on an extension, which changes which base is the sensible one.
- Control panels, collectives, mounts and adapters are optional modules you add afterwards.
The platform is PC-first. VIRPIL hardware enumerates as standard USB controllers, so games see it without a background driver running. You do still need the VPC Configuration Suite for the parts that matter: firmware updates, creating the correct base-and-grip profile, sensor calibration, response curves, button logic and LED setup. VIRPIL's own guidance is to connect and configure one device at a time, and to plug into a motherboard USB port or a powered hub rather than an unpowered one — a full rig with several VPC devices is exactly where a powered hub earns its place.
One piece of store vocabulary is worth learning early. VIRPIL lists a product as Back-Order when it is still in production but temporarily out of the warehouse; that is different from a product that has left the active catalogue. An order that mixes in-stock and back-ordered items waits for the whole order unless you split it, which catches buyers who assume a back-ordered base will ship on its own.
If you are still deciding between a yoke, a stick and a HOTAS for the aircraft you actually fly, that choice comes before brand — Flight Sim Controls: Yoke, Stick or HOTAS for Your Sim and Aircraft walks through it.
Choose the Base First: WarBRD-D, MongoosT-50CM3 or ATLAS
The two mechanical bases are not a case of paying more for a better version of the same thing. They are built around different geometry, and the geometry is the whole decision.
The WarBRD-D is the natural choice for an unextended stick — a side stick or a tabletop HOTAS or HOSAS arrangement. It uses a full-metal dual-cam gimbal with independently adjustable clutch dampers, and it ships with Standard, Heavy and Extra Heavy spring sets plus AviaSim and CosmoSim cam sets in No Center and Soft Center forms. Its defining trait is a wide mechanical throw: owners commonly report around 22° of movement per axis. It also comes with desktop legs, so it can be used on a desk without a full cockpit mount. That wide throw is also its limit — under a long 200 mm extension the same geometry produces a very large hand travel, which gets tiring and imprecise to fly.
The MongoosT-50CM3 base is the extension-oriented option. Its throw is shorter, commonly reported at roughly 15–16° per axis, and its spring preload and clutch dampers are adjustable from outside the base without opening it. That combination is what makes it the sensible base under a center-mounted stick with a 100–200 mm extension: the shorter throw keeps hand travel manageable, and external preload adjustment lets you tune a heavy extension without disassembly. It is meant to be hard- or desk-mounted, not used as a tabletop stick, and its dedicated mount adapter is a separate purchase.
The most common mistake is assuming the CM3 automatically beats the WarBRD-D because it costs more. It does not. For an unextended HOSAS or side-stick setup the WarBRD-D's larger movement is the more natural fit, and paying for the CM3 without intending to run an extension buys geometry you will not use.
ATLAS is VIRPIL's force-feedback branch, and it is a different proposition again. It uses a custom 25 Nm motor system that VIRPIL states transmits more than 12 kg of force at the stick, with 18° of travel, absolute position sensors and a Dyneema cord drive rather than a belt, gear or direct-drive arrangement. VIRPIL states it can later be upgraded toward the Pro specification, which raises output to 45 Nm and more than 22 kg. ATLAS runs its own FFB software with force trim, damping profiles and a Virtual Cam mode that can approximate spring and cam behavior in titles without native force feedback. Two things to weigh first: it is a pre-order product rather than established stock, and any force-feedback base needs genuinely rigid mounting given the forces involved. There is no long-term owner reliability record for it yet.
One compatibility note applies to both mechanical bases. They accept certain Thrustmaster Warthog, F/A-18C and Cougar grips, which gives Warthog owners an upgrade path that keeps their grip. VIRPIL's instruction is specific — remove the two bolts holding the base's connector so the plug can rotate rather than being damaged while the grip is fitted. Going the other way, a VIRPIL grip on a Thrustmaster base may lose some functions.
Which Grip Fits Your Flying: ALPHA Prime, CDT-AERO, FLNKR or Archer-SF
The current standalone grip catalogue has four families, and they divide by control style as much as by price. Whichever you pick, it is a grip only — the base is still a separate line item.
Constellation ALPHA Prime is the versatile default, and the one most people picture when they picture a VIRPIL grip. It is a lightweight metal-bodied grip with a lockable all-metal twist axis, a separate contactless brake-lever axis, an analog ministick, three four-way hats with push, a two-way hat with push, a dual-stage trigger, a two-position flip trigger, three momentary buttons and a scroll encoder with dual push. It comes in genuinely separate left- and right-hand versions, which is what makes it the grip of choice for a dual-stick HOSAS build. The twist axis can stand in for rudder pedals, though fixed- and rotary-wing pilots generally migrate to pedals.
The recurring caveat is size. The ALPHA shell is large and thick, and users with smaller hands report having to shift their grip to reach a few controls, even with the adjustable hand rest. It is tall enough that even on the WarBRD-D, the desktop-friendly base, a mounted setup is often the more comfortable long-term answer.
The Cadet-series CDT-AERO is VIRPIL's compact, lower-cost entry into the same ecosystem. It is a modular grip with a dual-stage trigger, flip trigger, three four-way hats with push, a paddle, three push buttons, an analog ministick, a digital brake-lever axis, a two-way mode slider and lockable twist, and it comes in dedicated left and right versions. The distinction to hold onto is that CDT-AERO is a grip, while CDT-AEROMAX is a complete upright flightstick pairing the same control concept with an all-in-one Cadet base. AEROMAX is sold in normal left/right and angled LZ/RZ variants, and the angled versions are configured for the omni-throttle posture that space sims favor. If you want to avoid the base-and-grip split entirely, AEROMAX is the one VIRPIL product that solves it in a single box. Because the Cadet line is newer, there are fewer years of field data on it than on the ALPHA and WarBRD hardware.
FLNKR is the Expert-series grip, a premium metal model shaped after modern Russian fighter controls. Its pre-installed module set gives eight momentary buttons, two virtual buttons, two two-way hats with push, a four-way hat with push, an analog stick and a brake-lever axis, and the input modules are swappable — alternate modules convert it to as many as four four-way hats with push. Labeling is available in English or Cyrillic. FLNKR has no built-in twist, so a fixed-wing build around it wants rudder pedals, and its right-hand fighter shape makes it a poor fit for a symmetrical HOSAS pair.
Archer-SF is a cyclic-style grip aimed at rotary-wing pilots. It carries a dual-stage trigger, a safety guard with its own button, three push buttons and five gated four-way hats with push, plus programmable label lighting. Like the other specialist grips it is not a twist-rudder option — the logic for a helicopter build is a dedicated collective and pedals rather than stick twist — so it is not the universal first grip that ALPHA Prime or CDT-AERO are.
Two Constellation grips still appear on compatibility lists but are no longer current products. The original Constellation ALPHA used the same ergonomic idea as the Prime with a reinforced plastic shell instead of metal; the Constellation DELTA was the older symmetrical, ambidextrous design. Both still work with current bases and remain a used-market option, but a buyer wanting current production or the metal Prime body should not go looking for them new.
VIRPIL Throttles: CDT-VMAX, MongoosT-50CM4 and VMAX Prime
The throttle line is where outdated advice bites hardest. The current catalogue runs CDT-VMAX, MongoosT-50CM4 and VMAX Prime; the older MongoosT-50CM3 Throttle has left the active lineup and survives as a legacy item, so a buyer following an older review toward "the CM3" is chasing a discontinued model.
MongoosT-50CM4 is the current middle of the range, and VIRPIL positions it explicitly between the other two. It keeps the familiar Mongoos base layout but moves to the newer VMAX-style ergonomic handles, with duralumin axis mechanics on bearings, dual throttle axes plus an auxiliary axis, and throttle tension now adjusted through top-panel ports instead of through the underside of the unit as on the CM3. New front-lift detent levers let you change detents with a thumb or palm rather than sliding the whole hand forward. If you want the traditional Mongoos format with current handle ergonomics, CM4 is the one.
CDT-VMAX is the compact Cadet throttle and the space-saving option. It provides two throttle axes plus an auxiliary axis, an analog ministick, axis dials, several four-way hats, adjustable throttle and auxiliary resistance, and interchangeable physical detent plates. It is the throttle for a desk or VR rig where width matters and for a first step into VIRPIL throttles. The trade-off is base-panel control density: it carries fewer switches than CM4 or VMAX Prime, and a pilot migrating from a switch-heavy throttle may want a control panel alongside it.
VMAX Prime is the flagship and the densest of the three. VIRPIL rates it at seven total axes and 49 button inputs, with metal handles finished with rubber grip pads, two throttle axes, an auxiliary axis, a contactless analog stick, contactless and digital dial axes, encoders, hats, toggles, a mode dial and swappable input modules. It is also the most complex, and its control count is overkill for general aviation or a first throttle — owners who do not need every switch are better served by CM4. Its handles are the design basis for the new CM4 handles, so the two share an ergonomic direction.
If you have not settled on a stick-and-throttle layout at all, the wider question of which HOTAS suits a given sim is worth answering first — Best HOTAS for MSFS, DCS and Star Citizen covers the field.
Panels, Collectives and Mounting the Whole Rig
The Universal Control Panel range is how a VIRPIL cockpit grows past the throttle. Panel #1 is the general-purpose one: 12 customizable RGB momentary buttons, six momentary ON-OFF-ON toggles, two latched ON-ON toggles, two guarded flip-cover toggles, three rotary encoders with push and two axis dials. Panel #2 is the fixed-wing panel, built around a multi-position landing-gear lever with an all-metal mechanism, a swappable detent plate, spring-loaded lift/return and contactless position sensing, backed by ten RGB buttons, ten toggles and three encoders. Panel #3 is the multi-axis panel, with four contactless axis levers for mixture, prop, throttle or rotary functions, ten RGB tactile switches, seven ON-OFF-ON toggles, three latching toggles, two push encoders and a five-way mode dial.
Watch the SharKa-50 name. VIRPIL reused the aircraft label across two product types, and they are not the same thing. The SharKa-50 Control Panel is a discontinued helicopter-themed panel whose role Panel #3 now fills with generic labels and revised toggles; the SharKa-50 Collective Grip is a separate, still-current product. Any listing that just says "SharKa-50" needs checking for which one it is.
The helicopter side of the ecosystem runs on the Rotor TCS and Rotor TCS Plus collective bases, both with an all-metal adjustable collective axis, an adjustable clutch and a three-position cam travel limiter. The current UPGRADED versions ship with the counter-balance kit fitted at the factory. TCS Plus adds a twist-throttle correction axis on the arm plus an engine-idle button and a stop arrangement, which matters for helicopters that need idle detents. Grip choices run SharKa-50, Hawk-60 and Dual-SF. A collective needs a side mount or cockpit structure — it is not a desktop substitute — and an adapter is available to hang Panel #1, #2 or the legacy SharKa panel beside it.
Mounts are not an accessory to budget for later; on a serious VIRPIL build they are part of the cost, and skipping them is the most common regret. The V4 desk mounts use steel construction and quick-release clamps, with an S mount aimed at throttles and unextended sticks and an L mount for larger or extended installations; both clamp desks from 9 to 63 mm thick. VIRPIL explicitly warns that cheap hollow or cardboard-core desks can be damaged by the clamp pressure, so a wobbly desk is a real constraint rather than a nuisance. Device-specific adapter plates are usually separate purchases, and they differ between the CM3 base, the WarBRD/D series, the throttles and the Cadet products.
Extensions come in 50, 75, 100 and 200 mm lengths, with a 200 mm S-curve version that lets you clock the grip rotationally. A longer extension lowers the centering force and increases physical hand travel — exactly why the shorter-throw CM3 base is the pairing that makes long center-stick builds work.
Everything downstream of the controls — rigs, seats, rudder plates and display positioning — is covered in Flight Sim Cockpits: Rigs, Seats and Mounts Explained.
What Is Current and What Has Moved to Legacy
VIRPIL's live catalogue and its legacy pages overlap enough that a status check is worth doing before you buy. This is what is in production and what has quietly left the active line.
| Product | Status | Notes |
|---|---|---|
| WarBRD-D base | Current | Unextended side stick or desktop use |
| MongoosT-50CM3 base | Current | Center stick and long extensions |
| ATLAS / ATLAS Pro | Pre-order | Force feedback; not yet settled stock |
| Constellation ALPHA Prime L/R | Current | Metal body, twist, dedicated left and right |
| CDT-AERO L/R | Current | Compact Cadet grip, base sold separately |
| CDT-AEROMAX L/R/LZ/RZ | Current | Complete Cadet flightstick, angled variants |
| FLNKR | Current | Expert-series metal fighter grip, no twist |
| Archer-SF | Current | Cyclic grip for rotary-wing builds |
| CDT-VMAX throttle | Current | Compact Cadet dual throttle |
| MongoosT-50CM4 | Current | Middle of the throttle range |
| VMAX Prime throttle | Current | Flagship, seven axes and swappable modules |
| Universal Control Panels #1/#2/#3 | Current | Switch, gear-lever and multi-axis panels |
| Rotor TCS / TCS Plus [UPGRADED] | Current | Collective bases with counterbalance |
| Desk Mount V4 S/L | Current | Steel clamps, device adapters separate |
| Original WarBRD base | Legacy | Replaced by WarBRD-D |
| MongoosT-50 / CM2 bases | Legacy | Predecessors to the CM3 |
| Constellation ALPHA L/R | Legacy | Plastic-shell predecessor to Prime |
| Constellation DELTA | Legacy | Older symmetrical HOSAS grip |
| MongoosT-50CM3 Throttle | Legacy | Superseded by CM4 and VMAX Prime |
| SharKa-50 Control Panel | Legacy | Replaced by Universal Control Panel #3 |
The pattern is simple: if a listing names a base or grip generation older than the ones in the current block, or the CM3 throttle as the flagship, it is describing the previous range.
How VIRPIL Compares With VKB, Winwing, Thrustmaster and MOZA
VKB is the closest ecosystem rival. The Gladiator NXT EVO is the cheaper integrated answer — a single unit rather than base-plus-grip — and it is the route many HOSAS builders take instead of a modular platform; the Gunfighter line is VKB's modular high end, with interchangeable cams and support for long extensions. The recurring VIRPIL-versus-VKB debate comes down to grip ergonomics, cams, clutch feel, connectors and regional shipping, and VKB grips are generally smaller and friendlier to smaller hands. VKB Gladiator NXT EVO Review: Which Variant Fits Your Rig breaks the Gladiator variants down if that is the direction you are weighing.
Winwing's Orion2-based HOTAS setups are the common DCS alternative where replica-style F-16, F/A-18 and F-15 control layouts matter more than broad grip interchangeability. If you want a specific aircraft's switch layout first and ecosystem flexibility second, Winwing is the comparison to make.
Thrustmaster is less a rival than a bridge here. Its Warthog, F/A-18C and Cougar grips fit VIRPIL bases, with the connector precaution noted earlier, so a Warthog owner can move to a VIRPIL base and keep the grip they already know. That reuse path is a legitimate reason to choose VIRPIL as a base upgrade rather than a full re-buy.
MOZA is the force-feedback wildcard. Its AB9 is a PC force-feedback base with 12 Nm of torque and roughly ±20° of range, while VIRPIL's ATLAS pre-order targets a 25 Nm mechanism with 18° of travel and keeps full VPC grip compatibility. If force feedback is the goal, those are the two to compare — with the caveat that ATLAS is new and pre-order rather than a settled product.
If it has to be one starting point, start with the base. An unextended desk or side-stick build lands on the WarBRD-D; a center stick on a long extension lands on the MongoosT-50CM3; a force-feedback cockpit waits on ATLAS. Choose the grip by control style — ALPHA Prime for a versatile left/right, CDT-AERO or AEROMAX for the compact entry, FLNKR for a fixed-wing metal fighter grip, Archer-SF for a cyclic. Then add the throttle and the mount, in that order, because a base, a grip and a throttle with nowhere rigid to sit is not a finished build.



